0x0
  *   ˆl–Ãa¾”Ši?u8 ƒq·.JbÑ¿Áƒ/·_†I|¥�+ÁÀ s    /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
/*
 *	pci.h
 *
 *	PCI defines and function prototypes
 *	Copyright 1994, Drew Eckhardt
 *	Copyright 1997--1999 Martin Mares <mj@ucw.cz>
 *
 *	For more information, please consult the following manuals (look at
 *	http://www.pcisig.com/ for how to get them):
 *
 *	PCI BIOS Specification
 *	PCI Local Bus Specification
 *	PCI to PCI Bridge Specification
 *	PCI System Design Guide
 */

#ifndef _UAPILINUX_PCI_H
#define _UAPILINUX_PCI_H

#include <linux/pci_regs.h>	/* The pci register defines */

/*
 * The PCI interface treats multi-function devices as independent
 * devices.  The slot/function address of each device is encoded
 * in a single byte as follows:
 *
 *	7:3 = slot
 *	2:0 = function
 */
#define PCI_DEVFN(slot, func)	((((slot) & 0x1f) << 3) | ((func) & 0x07))
#define PCI_SLOT(devfn)		(((devfn) >> 3) & 0x1f)
#define PCI_FUNC(devfn)		((devfn) & 0x07)

/* Ioctls for /proc/bus/pci/X/Y nodes. */
#define PCIIOC_BASE		('P' << 24 | 'C' << 16 | 'I' << 8)
#define PCIIOC_CONTROLLER	(PCIIOC_BASE | 0x00)	/* Get controller for PCI device. */
#define PCIIOC_MMAP_IS_IO	(PCIIOC_BASE | 0x01)	/* Set mmap state to I/O space. */
#define PCIIOC_MMAP_IS_MEM	(PCIIOC_BASE | 0x02)	/* Set mmap state to MEM space. */
#define PCIIOC_WRITE_COMBINE	(PCIIOC_BASE | 0x03)	/* Enable/disable write-combining. */

#endif /* _UAPILINUX_PCI_H */
  "   ˆl–Ãa¾”Ši?u8 ƒq·.*bÑ¿ÃƒsÂÁ     # SPDX-License-Identifier: GPL-2.0
HOSTARCH := $(shell uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/ \
                                  -e s/sun4u/sparc/ -e s/sparc64/sparc/ \
                                  -e /arm64/!s/arm.*/arm/ -e s/sa110/arm/ \
                                  -e s/s390x/s390/ -e s/parisc64/parisc/ \
                                  -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
                                  -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ )

ifndef ARCH
ARCH := $(HOSTARCH)
endif

SRCARCH := $(ARCH)

# Additional ARCH settings for x86
ifeq ($(ARCH),i386)
        SRCARCH := x86
endif
ifeq ($(ARCH),x86_64)
        SRCARCH := x86
endif

# Additional ARCH settings for sparc
ifeq ($(ARCH),sparc32)
       SRCARCH := sparc
endif
ifeq ($(ARCH),sparc64)
       SRCARCH := sparc
endif

# Additional ARCH settings for sh
ifeq ($(ARCH),sh64)
       SRCARCH := sh
endif

LP64 := $(shell echo __LP64__ | ${CC} ${CFLAGS} -E -x c - | tail -n 1)
ifeq ($(LP64), 1)
  IS_64_BIT := 1
else
  IS_64_BIT := 0
endif
     ˆÀÃƒÂk¿ÂÁ     /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
/*
 * These are the public elements of the Linux kernel AX.25 code. A similar
 * file netrom.h exists for the NET/ROM protocol.
 */

#ifndef	AX25_KERNEL_H
#define	AX25_KERNEL_H

#include <linux/socket.h>

#define AX25_MTU	256
#define AX25_MAX_DIGIS  8

#define AX25_WINDOW	1
#define AX25_T1		2
#define AX25_N2		3
#define AX25_T3		4
#define AX25_T2		5
#define	AX25_BACKOFF	6
#define	AX25_EXTSEQ	7
#define	AX25_PIDINCL	8
#define AX25_IDLE	9
#define AX25_PACLEN	10
#define AX25_IAMDIGI	12

#define AX25_KILL	99

#define SIOCAX25GETUID		(SIOCPROTOPRIVATE+0)
#define SIOCAX25ADDUID		(SIOCPROTOPRIVATE+1)
#define SIOCAX25DELUID		(SIOCPROTOPRIVATE+2)
#define SIOCAX25NOUID		(SIOCPROTOPRIVATE+3)
#define SIOCAX25OPTRT		(SIOCPROTOPRIVATE+7)
#define SIOCAX25CTLCON		(SIOCPROTOPRIVATE+8)
#define SIOCAX25GETINFOOLD	(SIOCPROTOPRIVATE+9)
#define SIOCAX25ADDFWD		(SIOCPROTOPRIVATE+10)
#define SIOCAX25DELFWD		(SIOCPROTOPRIVATE+11)
#define SIOCAX25DEVCTL          (SIOCPROTOPRIVATE+12)
#define SIOCAX25GETINFO         (SIOCPROTOPRIVATE+13)

#define AX25_SET_RT_IPMODE	2

#define AX25_NOUID_DEFAULT	0
#define AX25_NOUID_BLOCK	1

typedef struct {
	char		ax25_call[7];	/* 6 call + SSID (shifted ascii!) */
} ax25_address;

struct sockaddr_ax25 {
	__kernel_sa_family_t sax25_family;
	ax25_address	sax25_call;
	int		sax25_ndigis;
	/* Digipeater ax25_address sets follow */
};

#define sax25_uid	sax25_ndigis

struct full_sockaddr_ax25 {
	struct sockaddr_ax25 fsa_ax25;
	ax25_a