1-2
  #   ˆÅÄƒâÃa–ß=¿Jõ4Ÿº‚ œP¸'®6ò˜´oÂ �    /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
/*
 * Copyright 2019 Google Inc
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version
 * 2 of the License, or (at your option) any later version.
 *
 * Provides a simple driver to control the ASPEED P2A interface which allows
 * the host to read and write to various regions of the BMC's memory.
 */

#ifndef _UAPI_LINUX_ASPEED_P2A_CTRL_H
#define _UAPI_LINUX_ASPEED_P2A_CTRL_H

#include <linux/ioctl.h>
#include <linux/types.h>

#define ASPEED_P2A_CTRL_READ_ONLY 0
#define ASPEED_P2A_CTRL_READWRITE 1

/*
 * This driver provides a mechanism for enabling or disabling the read-write
 * property of specific windows into the ASPEED BMC's memory.
 *
 * A user can map a region of the BMC's memory as read-only or read-write, with
 * the caveat that once any region is mapped, all regions are unlocked for
 * reading.
 */

/*
 * Unlock a region of BMC physical memory for access from the host.
 *
 * Also used to read back the optional memory-region configuration for the
 * driver.
 */
struct aspeed_p2a_ctrl_mapping {
	__u64 addr;
	__u32 length;
	__u32 flags;
};

#define __ASPEED_P2A_CTRL_IOCTL_MAGIC 0xb3

/*
 * This IOCTL is meant to configure a region or regions of memory given a
 * starting address and length to be readable by the host, or
 * readable-writeable.
 */
#define ASPEED_P2A_CTRL_IOCTL_SET_WINDOW _IOW(__ASPEED_P2A_CTRL_IOCTL_MAGIC, \
		0x00, struct aspeed_p2a_ctrl_mapping)

/*
 * This IOCTL is meant to read back to the user the base address and length of
 * the memory-region specified to the driver for use with mmap.
 */
#define ASPEED_P2A_CTRL_IOCTL_GET_MEMORY_CONFIG \
	_IOWR(__ASPEED_P2A_CTRL_IOCTL_MAGIC, \
		0x01, struct aspeed_p2a_ctrl_mapping)

#endif /* _UAPI_LINUX_ASPEED_P2A_CTRL_H */
     ˆÀÅƒq—›Ä¾Â ñ    /* SPDX-License-Identifier: GPL-2.0 */
/*
 * linux/can/dev.h
 *
 * Definitions for the CAN network device driver interface
 *
 * Copyright (C) 2006 Andrey Volkov <avolkov@varma-el.com>
 *               Varma Electronics Oy
 *
 * Copyright (C) 2008 Wolfgang Grandegger <wg@grandegger.com>
 *
 */

#ifndef _CAN_DEV_H
#define _CAN_DEV_H

#include <linux/can.h>
#include <linux/can/bittiming.h>
#include <linux/can/error.h>
#include <linux/can/length.h>
#include <linux/can/netlink.h>
#include <linux/can/skb.h>
#include <linux/ethtool.h>
#include <linux/netdevice.h>

/*
 * CAN mode
 */
enum can_mode {
	CAN_MODE_STOP = 0,
	CAN_MODE_START,
	CAN_MODE_SLEEP
};

enum can_termination_gpio {
	CAN_TERMINATION_GPIO_DISABLED = 0,
	CAN_TERMINATION_GPIO_ENABLED,
	CAN_TERMINATION_GPIO_MAX,
};

/*
 * CAN common private data
 */
struct can_priv {
	struct net_device *dev;
	struct can_device_stats can_stats;

	const struct can_bittiming_const *bittiming_const,
		*data_bittiming_const;
	struct can_bittiming bittiming, data_bittiming;
	const struct can_tdc_const *tdc_const;
	struct can_tdc tdc;

	unsigned int bitrate_const_cnt;
	const u32 *bitrate_const;
	const u32 *data_bitrate_const;
	unsigned int data_bitrate_const_cnt;
	u32 bitrate_max;
	struct can_clock clock;

	unsigned int termination_const_cnt;
	const u16 *termination_const;
	u16 termination;
	struct gpio_desc *termination_gpio;
	u16 termination_gpio_ohms[CAN_TERMINATION_GPIO_MAX];

	unsigned int echo_skb_max;
	struct sk_buff **echo_skb;

	enum can_state state;

	/* CAN controller features - see include/uapi/linux/can/netlink.h */
	u32 ctrlmode;		/* current options setting */
	u32 ctrlmode_supported;	/* options that can be modified by netlink */

	int restart_ms;
	struct delayed_work restart_work;

	int (*do_set_bittiming)(struct net_device *dev);
	int (*do_set_data_bittiming)(struct net_device *dev);
	int (*do_set_mode)(struct net_device *dev, enum can_mode mode);
	int (*do_set_termination)(struct net_device *dev, u16 term);
	int (*do_get_state)(const struct net_device *dev,
			    enum can_state *state);
	int (*do_get_b